Electronics


CDA-001
#001

FLASHER UNIT

Fully self contained flasher unit to operate level crossing lights. Ideal for use with CDA #150 Level Crossing lights. Requires 15-17v AC input.

 
 
 
 
 
 
 

#0098

AUTOMATIC TWO TRAIN CONTROL

Ideal unit for running Two trains on one loop automatically. Once setup trains will rotate on a loop of track unattended. Easy to install and requires only three insulated gaps on one rail. Suitable for exhibition or display work.

(No Image Available)

 

CDA-010
#010

REMOTE TRAIN DETECTOR

Train detector unit which will turn on or off any electronic device. Uses small between track sensors to detect the passage of a train. Ideally suited for turning on and off level crossing lights. Use in conjunction with #001/035 flasher unit and #150 level crossing lights.

 
 
 
 
 

cda-011
#011

EXTRA LIGHT SENSORS

These extra light sensors can be installed with #010 to allow for turning on and off many combinations of accessories. (Pack of 2)

 
 
 
 
 
 
 

#020

FLUORESCENT LIGHT SIMULATOR

Make and light flicker like a fluorescent light.

(No Image Available)

 

#021

WELDING LIGHT SIMULATOR

Make a light globe flicker like a welding light.

(No Image Available)

 

#022

Extra Light globe for #021

(No Image Available)

cda-030
#030

CAPACITOR DISCHARGE UNIT

A capacitor discharge unit is an indispensable component of any layout using solenoid type point motors. Its use makes your point motors work more reliably and helps to protect against motor burnout. Only one unit is required for the average layout.

 
 
 
 
 
 
 

#035

FLASHER SOUND UNIT

Operates the same as #001 however #035 has a bell sound which works in conjunction to to the flashing lights. Can be operated with #010.

(No Image Available)

 

#050

REVOLVING EMERGENCY LIGHT SIMULATOR

Equip your emergency vehicles with their own flashing lights.

(No Image Available)

 

#051

Extra lights for #050

(No Image Available)

 

#080

AUTOMATIC REVERSING UNIT

Ideal for display purposes. Train will stop at end of track and then reverse directions and return to the other end automatically. Time delay can be adjusted.

(No Image Available)

 

#090

AUTOMATIC REVERSING LOOP INDICATOR

This unit includes a prewired section of HO track and a two aspect signal. When installed it will indicate with a red or green signal as to the status of the track power polarity.

(No Image Available)

 

Miscellaneous

 

#0409    Feeder wires with Peco Joiners

#0410    Feeder wires with Atlas Joiners

#0497    3 Switches & CDA Panel

#0498    3 Switches with mounting panel

#0499    6 Switches with mounting panel

#0503    Grain of wheat globes 12v. Clear, Red, Green & Amber

#0504    Grain of rice globes 12v. Clear, Red, Green & Amber

#0505    Grain of wheat 1.5v Clear

#0509    Small push-in bulb 14volts

#0511    GOW 1.5v short wire Clear

#0512    Grain of wheat 3.0v. Clear

#0560    Sub miniature 1.5v LED’s Yellow

#0561    1mm Fibre Optic (2*200mm)

#0563    3mm Blue LED’s Diffused (2)

#0564    3mm Blue LED’s Clear (2)

#0565    3mm Red LED’s with resistor (5)

#0566    3mm Green LED’s with resistor (5)

#0567    3mm Yellow LED’s with resistor (5)

#0568    3mm Bi-Colour LED’s with resistor (5)

#0590    Push button switch. Momentary ON (2)

#0591    Push button switch. Momentary OFF (2)

#0592    SPDT Mini Toggle switch

#0593    DPDT Mini Toggle switch

#0594    DPDT Aluminium lever toggle switch

#0595    DPDT Prewired reversing switch

#0598    DPDT Slide switch Black

#0599    DPDT Slide switch Alu Lever On-On

#0600    DPDT Slide Switch Aluminium

#0601    DPDT S/S Soft action switch

#0602    Small slide switch

#0603    DPTT Slide switch. For 3 ASP Signal

#0604    TPDT Switch

#0605    Ultra mini SPDT Switch

#0607    Terminal Strip 12 pole

#0618    Transformer Control Leads

#0621    Single strand wire 10m

#0622    Twin strand wire 5m

#0623    Insulating Alligator Clips

#0626    2-Pole Band cable

#0627    3-Pole Band cable